Combined Crushing and Drying Line

Combined Crushing and Drying Line

 Our Combined Wood Chipping and Crushing Machine is developed from

our BX-Series which is made up of Wood Chipping, Storage, Screw Feeder,

Wood Crusher, Cyclone and 2 Electrical Control Cabinet. The capacity of

our Combined Wood Chipping and Crushing Machine is from1 ton per hour

to 20 ton per hour.

The features of our Combined Wood Chipping and Crushing Machine:

1. Simple and Automatic Operation; 

2. Easy Maintain; 

3. It can be combined according to your requests, no limitation on the places; 

4. It realize the perfect combination on the chipping and crushing. 

========================================================

In the dryer, high-speed hot air stream sustain raw material in the suspending state, then the 

material is dried. Since air stream speed is very high, and material is suspending in air stream,

 the heat transfer surface between air and solid is large, heat transfer rate is high. Its peculiarly 

suitable for drying heat sensitive material like sawdust, rice shell, milled stalks etc. In drying 

process, clean cool air is heated by hot air stove, and mixed with wet material sent by spiral 

feeder. Wet sawdust is dried in few minutes. Dried material is discharged through centrifugal 

fan. Exhaust air is let out into atmosphere. This Dryer is used to dry the raw material with 

moisture content >50%. Power: 3kw (Centrifugal Fan) + 0.75kw (Air Lock)+ 3kw (Drum Motor) +

 1.5kw (Screw Conveyor)Capacity: (input) 300-700kg/hour (output) 200-500kg/hour 

Consumption of Fuel: 50kg

Matched Heat Stove & XCL-800 Cyclone &

Matched Pipes 10m & TGF-10L Air Lock & Y4-72-3 Fan

Matched Screw Conveyor TLSS240*3000

Matched Electrical Control Cabinet

Matched Moisture Sensor