Sale Wood Sawdust Briquette, Sawdust Briquettes Plant in China

Dear sir/madam,

I have a company of furmiture accessories and I am interesting in a sawdust briquette machine.
I need one for me and as i sell some sawdust briquettes machines I am interesting in reselling them too.

I have beech wood sawdust and I want to make briquettes.
probably I also need a crusher.
Can you advise some models of your company.
The wood I use is beech and the diameter of the pieces of the sawdust is until 3-4mm.
Do I need a crusher for them?
I also need a crusher for bigger woods about 5mm X 30mm X 500mm.
The briquette I want is around 5-8cm diameter and 30-50cm length.

Waiting your answer.

Best regards,
Alex
=======================replay about the project=========================

Dear Mr.Alex,

Thank you for your inquiry about sawdust/wood briquette plant. We are specialized in this line and we are glad to introduce ourselve as one of the leading company for screw type briquette machine in china.
We studied your project and found our briquette machinery is suitable well for your purpose.
Your raw material, beech sawdust is suitable for briquetting. The size 3-5 is good for briquetting.
For your bigger size wood about 5mm X 30mm X 500mm, we suggest our Hammer mill model FSJ-II that can crush this size wood into sawdust.
We think you need a dryer, because when the moisture of your raw material is higher than 12%, you need a dryer to reduce the moisture before briquetting. The best moisture is about 10%.
All our 3 models briquette machine can produce 30-50cm length briquettes, ZBJ-I and ZBJ-II Briquette machine is suitable for briquetting size below 5cm, so for 5-8cm briquette, we suggest model ZBJ-III briquette machine.
If you have any other quiry or opinion,please feel free to write to me.

Have a nice day!

B.Regards,
Kelly zhao
Anyang General International Co,.Ltd(AGICO)
Tel: 86 372 5965148 ext 8008
Fax: 86 372 5951936
http://www.ascof.com/Biomass-Briquette-Machine/
Msn:kellyzlf@hotmail.com