AGICO Sale Counter-flow Cooler,Wood Pellet Cooler, Counter-Flow Coolers in China

To cool pellets to temperatures of approx. 20 degrees C above the cooling air temperature, constructed on the fluidized bed principle. The cooler ventilator blows the cooling air through a feed pipe into the air distributor box and through a swirling base into the fluidized bed. This causes the pellets to be whirled up, cooled and conveyed to the pellet discharger. The side walls, which come into contact with the product and the swirling base are manufactured in stainless steel. The necessary switching devices are installed in the switch cabinet for the palletizes

SKLNSeries Counter-flow Cooler

(1)Temperature of cooled pellets won’t be +3~+5 degrees higher than room temperature;moisture reduce rate=3.5%.
(2)After stop,cooler discharges pellets automatically to avoid feeds from cross contamination.
(3)Special force discharge frames;flexibly slide,stable run.
(4)Be used to cool down all kinds of pellets;can be matched with
secondary volute separator.

SLNF Series Tipping Counter-flow Cooler 

(1)Asway tipping discharge device is controled by flexible hydraulic system.
(2)Adjustable discharge speed;material flows equably and smoothly.
(3)Rotating material sprinkle device to insure material be cooled equably and Drastically;also avoid pellets from break.
(4)Be used in cooling of various materials,such as pellets,extrude feed,sheet feed,powder,etc.