Our biomass pelletizer can make pellets from a wide range of biomass materials, such as: straw, sawdust, bamboo sawdust, wood chips, wood shavings, rice husks, small branches, grass, leaves, and groundnut shell, etc. To make pellets with our biomass pelletizer, the biomass materials need to be cleaned to remove other contaminants, and then ground in a hammer mill or chipped to a uniform size, which must be less than the thickness of the pellets that will be produced.
Wide range of biomass materials
Then, put these well prepared biomass materials into the feeder of our biomass pelletizer, and they will fall down between the rollers, where a solid metal plate sits below. Then as the roller rotate, the biomass materials are compressed through the die. A knife on the other side of the die will cut the emerged pellets into the set uniform length immediately, and then the finished pellets leave the biomass pelletizer.
Ring die pellet mills data:
|Model||MainMotor Power(kw)||Capacity(t/h)||Feeding Motor Power(kw)||Conditioner Motor Power(kw)||Diameter of Die (mm)||Diameter of Pellet(mm)|
Our biomass pelletizers have been exported to many countries, and won good reputations worldwide. We are a leading Chinese manufacturer and supplier of biomass pelletizers and have been professional for more than ten years. Our customers are pretty satisfied with our biomass pelletizer, and so will you if you try it!